10-12t/h Complete Wood Pellet Plant Line with Moving Floor Storage
1. Wood Pellet plant , widely used in large, medium and small wood
pellet manufacturers to produce high quality wood pellet fuel for
2. This machine can be used in the biomass and waste material such
as :wood log ,sawdust ,shaving , rice husk, straw, cotton stalk,
wood chips, palm shell , sunflower, olive, bagasse, and other raw
Make pellet request:
- Material Size : < 5mm
- Moisture : 12-15% according to different material .
Typical process flow –wood logs is example into wood pellets:
Debarking → Cosrse cutting - Chipping → Milling → Drying →
Pelletizing → Cooling → Bagging (the storage system shall be
designed when the line is automatic )
Related equipment :
Wood chipper :
To chip the wood log into 20-30mm chips .
Drum wood chipper series products are production of special
equipment, the product is widely used in particleboard factory,
medium and high density fiber board factory, stubble plant, biomass
wood pellet plant, wood factory and other industries and
manufacturers in the production of equipment for preparation before
the section. This product structure is advanced, high-quality
cutting blade material, the raw material adaptability, convenient
operation and maintenance. Cutting path is the main raw material of
wood, wood cutting, processing residues, such as branches,
branches, slab, slat cores, logs, veneer scrap, etc.), can be used
to cutting non-wood raw materials
Hammer mill To mill the wood chip into 6mm sawdust .
High milling efficiency, uniform milling , strong anti-blocking
ability for high moisture and high grease materials, wide
applicability, long life of hammer and screen. The Supreme Hammer
Mill is with reasonable design and excellent manufacturing. It
adopts SKF bearings, famous brand motors and brand-name couplings.
The main vulnerable parts are metal wear-resistant materials, which
adopt high-precision rotor dynamic balance. After the final
assembly, the 3D vibration intensity test is completed.
With US PATENT WHICH WITH HIGHER CAPACITY COMPARED WITH SAME POWER
AND MATERIAL :
The screen would be vibrating on the working which solve problems
that high moisture difficult to discharge .
Increased hammer impact plate, added more hits, high efficiency,
for wood material milling, the impact part of the chamber is made
of manganese steel, wear-resistant and impact resistant.
|Type||Mai shaft speed||Main power||(Kw)||Blade QTY||Sceen size|
Rotary Dryer : Reduce the moisture of wood sawdust.
Under the suitable size of raw material ,the moisture is requested
between 12-18% ,if more water content would cause cracked pellet
,if less would no formed . So dryer is necessary when moisture is
out of requested arrangement .
The wet material is conveyed by screw . Feeding side generate hot
air (furnace ,boiler etc)with wet material is sucked into inner of
dryer by draught fan . As the dryer rotates continuously, the water
inside material is evaporated by three ways .Another benefit of
heating the toughness is enhanced, thereby increasing production
efficiency, especially those with higher density, such as hardwood.
Heating enhances the toughness of the raw materials and acts to
soften the natural lignin in the raw materials.
Wood pellet machine :90-220kw
Storage system :
Moving floor is a hydraulically-driven moving-floor conveyance
system for moving bulk material or palletizedproduct, which can be
used in a warehouse, loading dock or semi-trailer. It automates and
facilitates loading and unloading of palletized goods by
eliminating the need for a forklift to enter the trailer.In thoes
system ,it can storage in large amount and avoid block of sawdust
,wood chip .The moving floor can be used in storage silo ,open
concrete made storage system .
Storage silos are cylindrical structures, typically 10 to 90 ft (3
to 27 m) in diameter and 30 to 275 ft (10 to 90 m) in height with
the slipform and Jumpform concrete silos being the larger diameter
and taller silos. They can be made of many materials. Wood staves,
concrete staves, cast concrete, and steel panels have all been
used, and have varying cost, durability, and airtightness
tradeoffs. Silos storing grain, cement and woodchips are typically
unloaded with air slides or augers. Silos can be unloaded into rail
cars, trucks or conveyors.
Pls contact us to know more .